Guys I have a 92 Chevy Caprice with a built 700R4 Raptor trans and 2800 stall converter. Im transplanting a very healthy vortec headed 355 in place of the current 305. Will EBL run this cam? And can it be tuned? Its a Comp Cams Magnum Hydraulic Flat Tappet 12-213-3 Specs:

Camshaft Specification Table
Part Number 12-213-3
Engine 1955-1998 Chevrolet
262ci-400ci
8cyl.
Grind Number CS 292H-10
Description

------------------------- ------------------------- ------------------------- -----

Intake Exhaust
Valve Adjustment 0 0
Gross Valve Lift 0.501 0.501
Duration At 0.006 Tappet Lift 292 292

------------------------- ------------------------- ------------------------- -----

Valve Timing At 0.006
Open Close
Intake 40 72
Exhaust 80 32

------------------------- ------------------------- ------------------------- -----

These Specs Are For The Cam Installed At 106 Intake CL
Intake Exhaust
Duration At 0.05 244 244
Lobe Lift 0.334 0.334
Lobe Separation 110

 

I am no expert but it seems in a Carprice this cam is a bit much.

Might need 4.11 gears !

Intake Exhaust
Duration At 0.05 244 244 LSA 110


yes EBL can handle a cam. there are options to tame larger cams at idle or off idle....