$32b TP INT data? MaF V?
Thread Starter
Member
Joined: Aug 2006
Posts: 484
Likes: 0
From: Tampa, FL
Car: 1988 Iroc-Z Red T-tops
Engine: 305 TPI LB9 55k miles
Transmission: Auto 700r4
Axle/Gears: 2.73 posi
$32b TP INT data? MaF V?
what address is the INT data offset for $32b?
I have BLM. I tried adding MAF voltage too with the $67 edit and creating it in the ADX file but the MAF readings were stuck at 2.47-2.7volts
same for my WB i tried to import. The APU seems finicky
I have my ADX definition package size at 25 by default anything over 29 and it will not read anything during datalog and 26-29 read slower then 25.
maybe I need to set it to 64.
but is there more data at address above 25 for $32B that I can use?
I have BLM. I tried adding MAF voltage too with the $67 edit and creating it in the ADX file but the MAF readings were stuck at 2.47-2.7volts
same for my WB i tried to import. The APU seems finicky
I have my ADX definition package size at 25 by default anything over 29 and it will not read anything during datalog and 26-29 read slower then 25.
maybe I need to set it to 64.
but is there more data at address above 25 for $32B that I can use?
Thread
Thread Starter
Forum
Replies
Last Post