i put a bunch of time and effort into cleanup and enhancing the tunerpro xdf for $4D, kinda like i did for $EE before.
might be a big help if someone actually has one of these ecms laying around, i found all XDFs for it to be fairly 'abandoned' looking.
not suprising since it's not a very common ecm.
anyway if anyone still tunes $4D, here ya go enjoy!
switch to category view

http://resfilter.net/files/carstuff/...-1.6steveo.xdf
might be a big help if someone actually has one of these ecms laying around, i found all XDFs for it to be fairly 'abandoned' looking.
not suprising since it's not a very common ecm.
anyway if anyone still tunes $4D, here ya go enjoy!
switch to category view

http://resfilter.net/files/carstuff/...-1.6steveo.xdf
Just read your tuning page for $EE, excellent write up. Wish I would have come across it much earlier. In the Full Time Open Loop section though, I think it should read "then raise the temperature to disable Closed Loop", but it is written as enable, unless I am reading it wrong... 

re-wrote to make it more clear; thanks for that
i wrote that stuff but never really got around to proof reading it
i wrote that stuff but never really got around to proof reading it
i'd be really interested in some feedback from anyone still running $4D. just did some more work to it; it's now among the more complete tbi xdfs out there.
should also mention a lot of credit should go to dimented24x7, i dug up an old hack that he did for this ecm and it helped quite a bit.
should also mention a lot of credit should go to dimented24x7, i dug up an old hack that he did for this ecm and it helped quite a bit.



