Data Logging BLM cell 0
Thread Starter
Senior Member
Joined: Oct 2000
Posts: 809
Likes: 24
Data Logging BLM cell 0
Car doesn't idle correctly for shiit.
My baseline BLM Cell 0 is 145.
I got a junk yard MAF, and swapped it. Now my cell 0 BLM's are 128 !! but the car still idles all over.
How can the MAF change the BLM's?? But only cell 0. All the other cells are still pretty much the same.
My baseline BLM Cell 0 is 145.
I got a junk yard MAF, and swapped it. Now my cell 0 BLM's are 128 !! but the car still idles all over.
How can the MAF change the BLM's?? But only cell 0. All the other cells are still pretty much the same.
Moderator
iTrader: (1)
Joined: Mar 2002
Posts: 18,432
Likes: 233
From: Chasing Electrons
Car: check
Engine: check
Transmission: check
Re: Data Logging BLM cell 0
> How can the MAF change the BLM's?? But only cell 0. All the other cells are still pretty much the same.
The MAF directly affects fueling via its reported air flow. The BLM is based on the O2 sensor feed back.
RBob.
The MAF directly affects fueling via its reported air flow. The BLM is based on the O2 sensor feed back.
RBob.
Thread
Thread Starter
Forum
Replies
Last Post