Gearhead EFI Forum
Thread Starter
Member

Joined: Jun 2004
Posts: 221
Likes: 0
From: GA
Car: 1988 Firebird Formula
Engine: 305 (LO3)
Transmission: 5 spd manual
Gearhead EFI Forum
Anyone here a member there? I want to download some files from this thread, https://www.gearhead-efi.com/Fuel-In...Information-4D. However, you have to be a member. I registered on Friday and have yet to be approved.
Joined: Dec 2004
Posts: 16,772
Likes: 1,001
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Gearhead EFI Forum
Just curious, why wouldn’t you be patient and not complain on an unrelated forum ?
Joined: Jul 2010
Posts: 936
Likes: 96
From: Marion, IL
Car: 86 Trans Am/85 K5 Jimmy
Engine: 406 FIRST/350 TPI
Transmission: TKO 600/700R4
Axle/Gears: 9Bolt/10Bolt front & back
Re: Gearhead EFI Forum
I believe I waited over a week to get access for downloading. I have accounts on a good number of forums and have never had that experience anywhere else. It was long enough that by time I did get access, I didn't even remember what rabbit hole I had traveled down to want to download a bin from there in the first place. I could see where someone who was actively trying to make adjustments or get a good base tune going would be a little impatient and begin questioning if they were even going to end up getting access.
Thread Starter
Member

Joined: Jun 2004
Posts: 221
Likes: 0
From: GA
Car: 1988 Firebird Formula
Engine: 305 (LO3)
Transmission: 5 spd manual
Re: Gearhead EFI Forum
ULTM8Z got them for me. Thanks!
RE being patient, their own messaging suggests that 24 hours is longer than it should take. 48hrs is more than reasonable. And 72 hours later, still not approved. The site seems like it is about dead, possibly for reasons such as this.
RE being patient, their own messaging suggests that 24 hours is longer than it should take. 48hrs is more than reasonable. And 72 hours later, still not approved. The site seems like it is about dead, possibly for reasons such as this.
Joined: Dec 2004
Posts: 16,772
Likes: 1,001
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Gearhead EFI Forum
Marks death was a real shock years ago.the site hasn’t been the same
Re: Gearhead EFI Forum
ULTM8Z got them for me. Thanks!
RE being patient, their own messaging suggests that 24 hours is longer than it should take. 48hrs is more than reasonable. And 72 hours later, still not approved. The site seems like it is about dead, possibly for reasons such as this.
RE being patient, their own messaging suggests that 24 hours is longer than it should take. 48hrs is more than reasonable. And 72 hours later, still not approved. The site seems like it is about dead, possibly for reasons such as this.
Make sure you read the rules. If you dont make an intro post and set your time zone correctly you could be purged or flagged as inactive. Here's the email for Shannen who helped me out.
1project2many@metrocast.net
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jason M 91Z
Tech / General Engine
3
Nov 18, 2000 07:38 AM










