Electronics Need help wiring something up? Thinking of adding an electrical component to your car? Need help troubleshooting that wiring glitch?

OK, I give up...unless someone helps

Thread Tools
 
Search this Thread
 
Old Jun 16, 2002 | 06:22 PM
  #1  
Joshua Leslie's Avatar
Thread Starter
Member
 
Joined: Nov 2001
Posts: 409
Likes: 0
From: Birmingham Mi, USA
OK, I give up...unless someone helps

hello

I posted below about my fuel gauge.

but ill go over it again.

it is pegged full.

I shorted the pink and black wires(inside pass. compartment) together, and the gauge went empty.

now, the gauge does not work becuz I had to take all the wires out of there harnesses cuz the fuel pump needed to be re-wired(went to carb)

so I just tried every possible combination of connecting the 3 wires in the pass. compartment with the 3 wires coming from the sending unit(15 combinations totat right?) and the only thing the gauge does is either stay pegged full, or go all the way empty.

Im sure the sending unit is fine, and im sure the gauge is fine, cuz it worked until I needed to re-wire the fuel pump.

so, any help would be greatly appreciated.

If it matters, I dont use the in-tank pump anymore, im running a Holley external.
Reply
Old Jun 16, 2002 | 06:33 PM
  #2  
2vmodular's Avatar
Senior Member
 
Joined: Feb 2002
Posts: 885
Likes: 0
don't forget to attach the ground terminal for the fuel guage sender to the metal shell of the car.
Reply
Old Jun 16, 2002 | 06:40 PM
  #3  
Joshua Leslie's Avatar
Thread Starter
Member
 
Joined: Nov 2001
Posts: 409
Likes: 0
From: Birmingham Mi, USA
what is the ground terminal?

is that another wire?

There are 3 wires inside the car, and 3 wires that come off the sender, they used to plug together in a harness...

is the harness the ground terminal?

Pleez!!! I am a novice with electrical!
Reply
Old Jun 16, 2002 | 07:37 PM
  #4  
deadbird's Avatar
TGO Supporter
 
Joined: Sep 2000
Posts: 6,775
Likes: 27
From: So.west IN
Car: 87 Formula/ 00 Xtreme
Engine: TPI 305/ v6
Transmission: struggling t-5/ 4l60E
Axle/Gears: 3.08/ 3.23
http://92b4crs.tripod.com/86wiring/dia-pics/81-1.jpg
Reply
Old Jun 16, 2002 | 10:38 PM
  #5  
Joshua Leslie's Avatar
Thread Starter
Member
 
Joined: Nov 2001
Posts: 409
Likes: 0
From: Birmingham Mi, USA
Oh, and I just thoght of one more thing!

the fuel pump and sending unit has no power going to it, I dont know if this matters or not.

I thought the gauge wire transmitted power, but I dont know, like I said, I no jack**** about electrical.

c'mon guys and gals, I need your help, im may be selling this car in the next couple weeks, and need everything tip-top!
Reply
Old Jun 16, 2002 | 11:55 PM
  #6  
moronwithtools's Avatar
Junior Member
 
Joined: Jun 2002
Posts: 7
Likes: 0
From: tn
reconnect the wire to sending unit[pink on mine]. reconnect the ground wire unless it was cut to wire the other pump in which case connect it to a good ground point[black or black & white]body or frame should do.
Reply
Old Jun 17, 2002 | 12:37 PM
  #7  
Joshua Leslie's Avatar
Thread Starter
Member
 
Joined: Nov 2001
Posts: 409
Likes: 0
From: Birmingham Mi, USA
does anyone know what the ground wire colors ae?

in the pass compartment the wires are Pink(that effects the fuel gauge when connected to any other wire) tan/white, and black, coming from the sending unit, the colors are Purple, grey, and black.

Like I said, I connected all these wires in every possibly way, which I believe was 15 combinations, and the only thing that happens is the gauge goes from full to empty.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jklein337
Tech / General Engine
2
Sep 19, 2018 06:23 PM
apo_bailon15
TBI
4
Mar 28, 2016 05:20 AM
mdtoren
TPI
12
Aug 23, 2015 12:52 PM
IROCZ1989
Suspension and Chassis
1
Aug 19, 2015 08:15 AM
mdtoren
Tech / General Engine
0
Aug 16, 2015 05:45 PM




All times are GMT -5. The time now is 03:07 AM.