I posted in brakes/suspension first but got only a few replies...

Does anyone have any suggestions for placement? and if so, is there any pictures of how you have it?

I've got a B&M ripper on a 5 speed... so i don't really wanna screw up my new shifter **** or anything...

how about steering wheel placements, etc?

 

:: bumps this up a bit ::

 

I mounted it on my center console....It's the left hand red switch in the lower left hand corner of the shifter opening, above the "1" in the shifter "H" pattern - the right hand red switch is for the cooling fans. Here's a pict:

<IMG SRC = "http://albums.photopoint.com/j/View?u=1554272&a=11944559&p=43121905">

Tim

[This message has been edited by Tim Burgess (edited May 31, 2001).]

[This message has been edited by Tim Burgess (edited May 31, 2001).]

[This message has been edited by Tim Burgess (edited May 31, 2001).]

 

Tim,

That is very unique, I like it. What are the four led's for? And the other switch and led's near the ashtray?

[This message has been edited by TunedPort350 (edited May 31, 2001).]

 

thanks for the pic... thats an interesting setup...

what do the rest of those things do and what are they for??

anyone else have linelock switch pics??

 

The 4 LED indicators are for the line lock, manual cooling fan control, nitrous enable, and alarm. The other stuff where the ash tray used to be are for the NOS bottle heater, Chevy bow tie back light on the nose (yellow or red light select), timing retard control, and fuel pressure monitor NOS shut down circuit. Here's a pict of the bow tie on the nose (when it's red).....

<IMG SRC = "http://albums.photopoint.com/j/View?u=1554272&a=11944559&p=43121912">

Tim

 

and the pics for your line lock... thanks...

err can u fix these links or email me the pics... thanks

tmonee@sbcglobal.net