no current to injectors?
#1
Member
Thread Starter
Join Date: Jun 2001
Location: va.beach.va/usa
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC (low 12's)
Engine: 400 sbc .040 over
Transmission: 700r mod
no current to injectors?
Hey guys,I've lost current to current to 1,3,5,and 7 injectors.I've replaced computer,
checked wires throughly(I think)and check the fuse inside 87 IROC.any help would be appreciated.thanks
------------------
87 IROC WITH 409(.040 OVER400) MINIRAM,NOS(125HP)TRICK FLOW PORTED HEADS,C.C.CAM,FLOWTEK HEADERS,CUSTOM PROM,MODIFIED 700R TRANS,2400 B&M CONVERTER,3.73POSI REAREND.
LOOKING FOR THE 11 SEC. ZONE.current ets.12.39@114 mph
checked wires throughly(I think)and check the fuse inside 87 IROC.any help would be appreciated.thanks
------------------
87 IROC WITH 409(.040 OVER400) MINIRAM,NOS(125HP)TRICK FLOW PORTED HEADS,C.C.CAM,FLOWTEK HEADERS,CUSTOM PROM,MODIFIED 700R TRANS,2400 B&M CONVERTER,3.73POSI REAREND.
LOOKING FOR THE 11 SEC. ZONE.current ets.12.39@114 mph
#2
TGO Supporter
Join Date: Sep 2000
Location: So.west IN
Posts: 6,775
Likes: 0
Received 26 Likes
on
23 Posts
Car: 87 Formula/ 00 Xtreme
Engine: TPI 305/ v6
Transmission: struggling t-5/ 4l60E
Axle/Gears: 3.08/ 3.23
A guess would be the wire has broken somwhere along the line. The left & right sides all fire together, 1,3,5 & 7 are soldered to a single common wire. If memory serves me correct, the common color between both sides is pink (might might very well be wrong) but the actual ECM drive wires are light blue & green (I don't know which side for which, sorry) Best thing to do is get an multimeter & test for resistance between the ECM & the splice,, if there is no resistance reading, then you'll need to start hunting for a broken wire.
------------------
The mind is like a parachute, it only works when its open
[This message has been edited by deadbird (edited September 01, 2001).]
------------------
The mind is like a parachute, it only works when its open
[This message has been edited by deadbird (edited September 01, 2001).]
#3
Member
Thread Starter
Join Date: Jun 2001
Location: va.beach.va/usa
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC (low 12's)
Engine: 400 sbc .040 over
Transmission: 700r mod
thanks ,i'll give it a try!!
------------------
87 IROC WITH 409(.040 OVER400) MINIRAM,NOS(125HP)TRICK FLOW PORTED HEADS,C.C.CAM,FLOWTEK HEADERS,CUSTOM PROM,MODIFIED 700R TRANS,2400 B&M CONVERTER,3.73POSI REAREND.
LOOKING FOR THE 11 SEC. ZONE.current ets.12.39@114 mph
------------------
87 IROC WITH 409(.040 OVER400) MINIRAM,NOS(125HP)TRICK FLOW PORTED HEADS,C.C.CAM,FLOWTEK HEADERS,CUSTOM PROM,MODIFIED 700R TRANS,2400 B&M CONVERTER,3.73POSI REAREND.
LOOKING FOR THE 11 SEC. ZONE.current ets.12.39@114 mph
#4
Supreme Member
Join Date: Jul 1999
Location: Tucson, AZ, USA
Posts: 1,335
Likes: 0
Received 2 Likes
on
2 Posts
Car: '92 Z28; Dk Teal; Her Pkg
Engine: 305
Transmission: Richmond 6 Spd
Axle/Gears: Moser 9", Detroit Locker, 3.70
Have you checked both injector fuses? There are two injector fuses in the fuse panel - one for the left & one for the right bank.
------------------
Tim
1992 Z28, 305 TPI 5 speed, 12.1 sec @ 114.7 mph
1984 Berlinetta 305 TPI Auto, 13.8 sec @ 99.7 mph
------------------
Tim
1992 Z28, 305 TPI 5 speed, 12.1 sec @ 114.7 mph
1984 Berlinetta 305 TPI Auto, 13.8 sec @ 99.7 mph
Thread
Thread Starter
Forum
Replies
Last Post
92projectcamaro
Engine/Drivetrain/Suspension Parts for Sale
11
01-18-2016 08:00 AM