A few questions. Ive got a 30 amp relay. Power wire for the relay goes to the battery, should this be fused? I assume yes. Relay ground to a good ground. Switched source to a fuse tap in fuse box used for previous smaller inline pump. That leaves the two wires from the pump. One is positive(+) it goes to the relay. What about the negative(-) pole offthe pump? Should this go to the other power blade on the relay(it has two)? Or should this be grounded also? I think I am making this more difficult than it has to be. You guys understand what I mean? My real concern is what to do with the ground offthe pump. The other four wires I am fairly certain of. Any help out there?

 

For a standard five pin relay:

Pin marked 86 to ign power. Pin marked 85 to ground. Pin marked 30 to fuse then battery. Pin marked 87 to + side of fuel pump. Ground on fuel pump to ground.

John

Heart of Texas Power and Performance

 

John, thankyou very much for your reply. Cut and dry, to the point. Just what I needed. I got it now. Thank you again.