'87 digital dash in a '91
Member



Joined: Nov 2002
Posts: 472
Likes: 15
From: Washington State
Car: '84 Berlinetta
Engine: ZZ4
Transmission: BTOD stage 3
Axle/Gears: 3.23 posi disc
Yes, we can make anything fit in a F-body...
It would be (i think) a wiring nightmare. It might fit fine, but would most likely require different wiring and possably different sender units (Espacilly if your current spedo is cable driven)
Check with Dakoda Digital, they would be able to tell you. Cant remember the web address though.
It would be (i think) a wiring nightmare. It might fit fine, but would most likely require different wiring and possably different sender units (Espacilly if your current spedo is cable driven)
Check with Dakoda Digital, they would be able to tell you. Cant remember the web address though.
Supreme Member
iTrader: (2)
Joined: Jan 2003
Posts: 1,083
Likes: 0
From: Northwestern Pennsylvania
Car: 1985 Pontiac Trans Am
Engine: 355 with stuffs.
Transmission: 700R4
Axle/Gears: 4.10 Posi
Digital dash
couple questions:
First, do you have the digital dash out of the 87?
Second, what engines are in the '87 and the '91?
(reason I'm asking is v6 and v8 use different tachs, if you use a v6 tach on a v8 and vice versa, you will get incorrect readings unless you change the senders)
First, do you have the digital dash out of the 87?
Second, what engines are in the '87 and the '91?
(reason I'm asking is v6 and v8 use different tachs, if you use a v6 tach on a v8 and vice versa, you will get incorrect readings unless you change the senders)
Thread
Thread Starter
Forum
Replies
Last Post





