Ok heres the deal. Original car was a 90 camaro RS 305 TBI. I swapped in a carbed 357 by hacking up the original harness. I recently got my TPI setup off a 91 T/A with a 305. I put LT1 injetors and a 350 chip in and went on my way. My issue is I have no speedometer or communcation with the computer from the ALDL connector. I've narrowed it down to the connector off the engine harness to the connector for the instrument panel. The I/P harness is White the Engine harness is Black. Ifnyow can tell me where the stray wires go please tell me!!!

White Black
A. -------- Brown
B. Pink w/black trace Pink w/black trace
C. Brown w/white trace Brown w/white trace
D. Gray --------
E. White w/black trace White w/black trace
F. Pink w/black trace Pink w/black trace
G. Pink w/black trace Pink w/black trace
H. Tan w/black trace Tan w/ black trace
J. Orange Orange
K. --------- Brown
L. Blue Blue
M. -------- Black w/white trace
N. Orange w/black trace Orange w/black trace
P. Red ----------
R. --------- Purple w/white trace

If any of you guys have run into this issue before please lt m know as I'm having a hell of a time trying to set up my new chip. Please help me guys!!!

Thanks
Chris

 

try this post https://www.thirdgen.org/techbb2/sho...hreadid=186359