just finished swapping a carbed V8 for the meek V6............

i have power to all my fuses, but my fuel pump does not turn on
and the car will not crank

i am running the stock electric fuel pump to a 3 port regulator

any help is appreciated

VATS possibly?

thanx

 

ok, i just bypassed the starter enable relay, but it still wont crank




i am leaving the ECM/ harness in, btw, in case i ever want to switch to EFI

 

even power to the fuel pump fuse when you turn on the key? and hows everything look at your fuel pump relay. i had a wire pop out of my relay harness plug once.

 

tyler-

the ecm wire off the battery, where does that connect to?

i think that maybe the problem

(for the fuel pump atleast)

 

jesus, i do not know. my setup is all different after relocated both batteries to the hatch. iam not sure if you need the ecm to run the fuel pump or not. id find the power wires for the fuel pump relay and check to see if you have 12+ when you turn on your ign (for 2secs when you turn the key on). im probably not the best guy to ask for help on this. i would also just trace all the wires from the bat to where ever they go just to make sure there is a solid connection. maybe search for a diagram of the fuel system. its late and iam unable to think of how the fuel pump gets its power. sorry