HI, im puttin a camaro fron end on my firebird, and i was wonderin if any body knows:
Are the wire colors different?
if so does anyone have the diagrams for both the firebrid and the camaro?
any help would be appreciated.

 

"shakes head in disbelief"!

Don't know....but I wouldn't do it!

 

It will work, as long as you wire in a second connector for the inboard high beams.
An easier way to go would be to get the complete underhood headlight wiring harness from a Camaro and swap in; they unbolt at the firewall next to the brake booster.

Pete

 

OK.......I've been as good as I can be....


...I've got to ask.

WHY would you be putting a Camaro front end on a Firebird?

My curiosity is killing me!

 

Don't forget to change the fenders too.

 

Im puttin the camaro front end on because, i crashed the firebird up, and having an extra camaro around for parts(Bought it for the engine) just seemed to be the answer, plus i just got this urge to see how it works. And i did get a new set of fenders(dented them up too)

 

Ive been studying the wiring diagrams for the firebird and the camaro ,and must admit, im confused. Could anyone please help and make this make sense?

Wolfe

 

The 'bird headlamp plug will work on the outer camaro lamp (low beams). You just have to tie/splice another harness plug into the green wire for the inner high beam lamp that the camaro's have. Take the camaro high beam lamp and plug w/wires, splice green into green and ground the black.