high beam indicator lamp
Thread Starter
Junior Member
Joined: Nov 2002
Posts: 66
Likes: 0
From: Texas
Car: Camaro
Engine: 2.8L MPFI
Transmission: 700R4
Axle/Gears: Stock round ones
high beam indicator lamp
Is the High beam indicator lamp for an 86 camaro fused?
Also I have a Haynes manual that has the 84 wiring diagram for the lights and so forth(not for the ecm). I am wondering if that is a basic format used at least through '86 for lights and so forth!
Reason being I need to pass inspection! The high beams work but not the Indicator lamp!
So I pull the lamp out,,,, looks fine,,,,,,, so I replace it anyway,,,, Viola works just great! Now to hook up the cable and put back the screws and headoff to the station in the morn! Later!!!!!!!!!!!!!!!!!!!!!!!!!!!! and of course the lamp is not fused(on it's on circuit) and more than likely the standard diagram is true even for el caminos
Jammer Out
Also I have a Haynes manual that has the 84 wiring diagram for the lights and so forth(not for the ecm). I am wondering if that is a basic format used at least through '86 for lights and so forth!
Reason being I need to pass inspection! The high beams work but not the Indicator lamp!
So I pull the lamp out,,,, looks fine,,,,,,, so I replace it anyway,,,, Viola works just great! Now to hook up the cable and put back the screws and headoff to the station in the morn! Later!!!!!!!!!!!!!!!!!!!!!!!!!!!! and of course the lamp is not fused(on it's on circuit) and more than likely the standard diagram is true even for el caminos
Jammer Out
Last edited by Stryder; Feb 22, 2004 at 11:43 PM.
Thread
Thread Starter
Forum
Replies
Last Post
