Speedometer Doesn't Work
Thread Starter
Junior Member
Joined: Feb 2004
Posts: 7
Likes: 0
Speedometer Doesn't Work
I've got a 1992 Z/28 5.7L, and recently took the dash apart to swap out some bad bulbs. After I got finished, I put the speedometer gauge and odometer gauge back in, and now the speedometer doesn't work!
There aren't any bad fuses, I've checked all that. All the connections are fine on the speedometer, none of the posts on the gauge are bent, broken, or bad.
It looks like the gauge is getting power, because if you play w/ the needle while it's running, it pushes it back to the left.
I never changed anything in the dash, asides from the bulbs, so I can't figure out what the problem is.
Anybody have any clue?
There aren't any bad fuses, I've checked all that. All the connections are fine on the speedometer, none of the posts on the gauge are bent, broken, or bad.
It looks like the gauge is getting power, because if you play w/ the needle while it's running, it pushes it back to the left.
I never changed anything in the dash, asides from the bulbs, so I can't figure out what the problem is.
Anybody have any clue?
Thread
Thread Starter
Forum
Replies
Last Post
