wiring for TPI
Thread Starter
Senior Member
Joined: Sep 2004
Posts: 572
Likes: 0
From: Chouteau, OK
Car: Bitchin' 92 RS
Engine: 350 TPI
Transmission: 700R4
wiring for TPI
I'm dropping a TPI into my '77 fire Bird.
here is my question, what electics are needed just to get the engine running.
I think all I need is a wiring Harness and a VATS module, along with a inline fuel pump, is this correct?
thanks for the help guys.
Kyle
here is my question, what electics are needed just to get the engine running.
I think all I need is a wiring Harness and a VATS module, along with a inline fuel pump, is this correct?
thanks for the help guys.
Kyle
TGO Supporter
Joined: Sep 2003
Posts: 6,127
Likes: 11
From: conway, s.c.
Car: 1989 Iroc-Z
Engine: 5.7L TPI
Transmission: 700R4
Hello RebelRacer,
Since this isn't a third gen related question I am going to lock it and leave it on the board so that any board member who has input for you can either e-mail or PM you. I will give you some of the information that you need to help you out.
You will need the wiring harness and unless you are taking everything out of a 1989 or later car you will not need the VATS module and everything that goes with it.
Since this isn't a third gen related question I am going to lock it and leave it on the board so that any board member who has input for you can either e-mail or PM you. I will give you some of the information that you need to help you out.
You will need the wiring harness and unless you are taking everything out of a 1989 or later car you will not need the VATS module and everything that goes with it.
Thread
Thread Starter
Forum
Replies
Last Post
1989formula5.7l
TPI
6
Aug 17, 2015 02:56 PM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 12, 2015 03:41 PM