I think that I purchased all the parts required for the factory rear defrost system. My question is the wiring harness. I have a section which the factory button plugs into and the harness which runs under the drivers side carpet to the drivers side hatch strut. I also have the ground wire for the passanger strut. I can see where the harness from the button connects to the long harness to the drivers hatch strut. That leaves me with three wires and connectors on the portion of the harness from the button. I cannot find where these wires should connect to in the Hayes wiring diagrams. Am I missing another harness? Should these three wires plug into exsisting connectors?

Any help would be great!!!