Bulkhead Connector Pinout
Thread Starter
Junior Member
Joined: Jul 2002
Posts: 32
Likes: 6
From: Bellevue, NE
Bulkhead Connector Pinout
Maybe somebody here can help me out. Yes, I did a search and came up with nothing.
Gettin ready to put an 88 350 TPI in place of an 85 Firebird 2.8. Have all the TPI harness and such. What I want to find out is if the pins at the bulkhead connector at the fuseblock are the same. IE: do the oil press sensor wire, or the temp gauge wire, etc., go to the same position in the connector. If so, this will be a snap.
Thanks in advance,
Dave Z.
Gettin ready to put an 88 350 TPI in place of an 85 Firebird 2.8. Have all the TPI harness and such. What I want to find out is if the pins at the bulkhead connector at the fuseblock are the same. IE: do the oil press sensor wire, or the temp gauge wire, etc., go to the same position in the connector. If so, this will be a snap.
Thanks in advance,
Dave Z.
Thread
Thread Starter
Forum
Replies
Last Post
TMZIrocZ350
Engine/Drivetrain/Suspension Parts for Sale
1
Oct 7, 2015 12:09 PM
tmork454
Transmissions and Drivetrain
0
Sep 29, 2015 06:33 PM
