I am trying to finish my motor swap and hit a snag. I am switching from a 305 TBI to a carbed 350. In some of the posts on here it says to connect the new HEI dist to a red/pink wire and a black wire. Others say it should be a red/pink wire and a white wire. The old coil had a red/pink wire and a white wire. It also had 2 wires that plugged into the old dist. The old dist had 4 wires coming into it, red/pink, black w/red stripe, purple w/white stripe, tan. What should I use? I looked through my Hanes manual without any luck as to which to use. Thanks.