what feeds power to the fuse block?
Thread Starter
Supreme Member
Joined: Mar 2003
Posts: 1,301
Likes: 0
From: Severn, MD.
Car: '88 T/A and '90 T/A
Engine: LB9/383
Transmission: T5/700R4
what feeds power to the fuse block?
I need to know which terminal on the firewall connector sends 12v. to the fuse block. I got rid of my factory harness in the process of ditching the TPI. On the stock setup it comes from the starter through a fusbible link through the harness and to the fuse panel.
Thread Starter
Supreme Member
Joined: Mar 2003
Posts: 1,301
Likes: 0
From: Severn, MD.
Car: '88 T/A and '90 T/A
Engine: LB9/383
Transmission: T5/700R4
Originally posted by 92rsbowtie
get a test light and start probing
get a test light and start probing
Thread Starter
Supreme Member
Joined: Mar 2003
Posts: 1,301
Likes: 0
From: Severn, MD.
Car: '88 T/A and '90 T/A
Engine: LB9/383
Transmission: T5/700R4
FWIW, I found my shcematics and pin A4 feeds the ignition switch and switched circuits and G5 feeds constant circuits.
TGO Supporter
Joined: Sep 2003
Posts: 6,127
Likes: 11
From: conway, s.c.
Car: 1989 Iroc-Z
Engine: 5.7L TPI
Transmission: 700R4
Originally posted by NastyL98_T/A
FWIW, I found my shcematics and pin A4 feeds the ignition switch and switched circuits and G5 feeds constant circuits.
FWIW, I found my shcematics and pin A4 feeds the ignition switch and switched circuits and G5 feeds constant circuits.
Thread
Thread Starter
Forum
Replies
Last Post
Ghettobird52
Tech / General Engine
16
Jul 5, 2024 11:18 PM