help troubleshooting my non-working blinkers
Thread Starter
Member
iTrader: (4)
Joined: Mar 2007
Posts: 122
Likes: 0
From: NE Texas
Car: 1986 Iroc, 89RS
Engine: 350 tpi, 350 tbi
Transmission: 700r4,700r4
Axle/Gears: 4.10,2.73
help troubleshooting my non-working blinkers
my blinkers dont work, where do i start
Member
iTrader: (1)
Joined: Oct 2006
Posts: 473
Likes: 2
From: Kansas
Car: 82 Camaro Z28, 88 IROC-Z
Engine: 5.0L TBI., 5.7TPI
Transmission: Auto TH200C, 700R4
Axle/Gears: 3.23 posi, ones that rotate!
Suggestions from the 82 service manual......
If ALL turn lights don't flash....
1. Check TURN B/U FUSE by operating BACK UP LIGHTs (B/U = Back Up)
IF Back Up lights don't work, replace the Turn B/U Fuse
2. Check TURN FLASHER, TURN-HAZARD SWITCH ASSEMBLY, and related wiring. {Turn Flasher is mounted ABOVE the convience center. The convience center is on rith side of drives's dash, just left of the console. The ALDL is mounted to the bottom of the Convience Center. I think you will have to remove the convience center to get to the Turn Flasher. You can pick up a new flasher at any auto parts store, in the electrical section.
Hazard switch is mounted on the steering column, right side.}
If only one turn light doesn't flash, check that its ground is clean and tight.
Let us know if you need additional help.
Dave
If ALL turn lights don't flash....
1. Check TURN B/U FUSE by operating BACK UP LIGHTs (B/U = Back Up)
IF Back Up lights don't work, replace the Turn B/U Fuse
2. Check TURN FLASHER, TURN-HAZARD SWITCH ASSEMBLY, and related wiring. {Turn Flasher is mounted ABOVE the convience center. The convience center is on rith side of drives's dash, just left of the console. The ALDL is mounted to the bottom of the Convience Center. I think you will have to remove the convience center to get to the Turn Flasher. You can pick up a new flasher at any auto parts store, in the electrical section.
Hazard switch is mounted on the steering column, right side.}
If only one turn light doesn't flash, check that its ground is clean and tight.
Let us know if you need additional help.
Dave
Thread Starter
Member
iTrader: (4)
Joined: Mar 2007
Posts: 122
Likes: 0
From: NE Texas
Car: 1986 Iroc, 89RS
Engine: 350 tpi, 350 tbi
Transmission: 700r4,700r4
Axle/Gears: 4.10,2.73
First off i apoligize for posting a really BAD question. No details, just a dumb question.
Second thanks for the great responses. I haven't had time to work on the car, but I will get back to ya when I do.
Man, i am impressed. You took the time to give me a really great response,,,thanks. You guys are the bomb..
Second thanks for the great responses. I haven't had time to work on the car, but I will get back to ya when I do.
Man, i am impressed. You took the time to give me a really great response,,,thanks. You guys are the bomb..
Thread
Thread Starter
Forum
Replies
Last Post
RABMAN
Interior Parts Wanted
2
Sep 18, 2015 09:02 PM
91, assembly, blinkers, camaro, coming, firebird, generation, hazard, nonworking, on, switch, troubleshooting





