coil in cap to divorced coil
Thread Starter
Member
Joined: Sep 2006
Posts: 413
Likes: 0
From: Sacramento,Ca,
Car: 1990 Iroc Z,2004 Z06 Corvette
Engine: 5.7 L98 tpi/LS6 346 ci
Transmission: 700r4/MN12
Axle/Gears: 10 bolt 3.23/DTE 3.42
coil in cap to divorced coil
what all do i have to do to swap to the smaller cap style
Supreme Member
iTrader: (1)
Joined: Oct 2004
Posts: 3,361
Likes: 2
From: Worcester, MA
Car: 86 T/A
Engine: HSR 355
Transmission: 700R4
Axle/Gears: 2.77 posi
Re: coil in cap to divorced coil
I did it, it's SO easy but you need all the parts.
You'll need:
The new distributor
coil/mounting bracket
the wiring pigtails: 1. 4 wire connector to distributor from harness, 2. distributor to coil, 3. 2 wire from coil to harness
And the main wire from coil to distributor.
The wiring was all the same color code on my car- very easy to swap. Just remember to check the firing order and timing afterwards.
You'll need:
The new distributor
coil/mounting bracket
the wiring pigtails: 1. 4 wire connector to distributor from harness, 2. distributor to coil, 3. 2 wire from coil to harness
And the main wire from coil to distributor.
The wiring was all the same color code on my car- very easy to swap. Just remember to check the firing order and timing afterwards.
Thread
Thread Starter
Forum
Replies
Last Post
