a few days ago i fried my dash harness by not watching what i was doing ,so i took it out to repair it. all fixed now ,but i don't know which wires to bundle together ,like factory .or where they route i.e. over steering colum ,or under. any help will be greatly appreciated .
I know this is an old post... but I'm looking for the same info.... no matter what I do, it doesn't seem to fit right! Anyone?
Member
82CrossFire Z28
Member
close
Oct 15, 2021
WhiteBlaze
Look at my posts in this old thread
https://www.thirdgen.org/forums/elec...rritation.html
You will find three diagrams of the dash area wiring for the 82 Camaro. The wiring harness routing for your model year will be very similar. It will at least give you a basic idea of how the different harness sections are bundled and routed.
Good luck with getting it all back together. Next time maybe take a few photos and draw some diagrams before you remove things. Then you might have a better chance of getting everything back in the correct place.
Look at my posts in this old thread
https://www.thirdgen.org/forums/elec...rritation.html
You will find three diagrams of the dash area wiring for the 82 Camaro. The wiring harness routing for your model year will be very similar. It will at least give you a basic idea of how the different harness sections are bundled and routed.
Good luck with getting it all back together. Next time maybe take a few photos and draw some diagrams before you remove things. Then you might have a better chance of getting everything back in the correct place.