This guys on this forum are AWESOME ! ! I got my hatch motor to work! It turns out that the reason it was not working was that it was stuck between the up and down cycle. kind of like an elevator stuck between floors - the wires i found at my motors connector were: Blue-White-Orange-and Brown -the Blue and Brown on each end always had 12v - the Orange and White did not have any power - I used a piece of small solid core wire to jump the Brown- to Orange terminals on the connector with the connector plugged into the motor and the motor finished going down, then rised back up! This Was Awesome ! By the way, i held the jumped connection a second too long and the asembly started to lower again, i just let it finish going down and let it return back up and pulled the jump ,closed my hatch, and JUST LIKE MAJIC! The hatch latched and pulled down! THANKS FOR EVERYONES HELP!