hello and thank you, i have a 350 tpi motor with a stealth ram and i am getting code 36 wich as i read it is intake air temp sensor so i replaced it erased code started it and it came back, so i then test voltage to it which is a constant 5 volt and from what i have read on searches is correct. i then cheched ohms on both sensors at room temp and they are showing coreeectly, so my question is what else could shoot this code? also i did disconect throdddle body coolant on the install but if that will effect it so be it i just wanted to provide as much info as possible to not waste any ones time