well i decided to go with all a/m gauges and the only thing im going to have a issue with is the gas gauge. will a a/m auto meter gas gauge work with a stock 86 camaro fuel sending unit ? if not what are my options i would rather not go with a a/m fuel tank and i have allready converted the fuel sender for carb use. thanks all

 

Ok well it makes sense you would have to use the same one. but i think it should work it all works on electricity unless you going to mechanical gauge then you would have to change.

 

Not all gauges and senders are created equal.
You'd need a gauge that shows empty at 0 ohms and full at 90 ohms.

Hope this helps.
Lou

 

have you used an a/m gauge on your stock sending unit lou ?

 

No, my car is stock, no aftermarket gauges.
I just did the homework for you and found out that Autometer does carry 0-90ohm fuel level gauges. As an example, product #2641.
So when you find your favorite style, make sure the gauge you get has the 0-90ohm range.

Hope this helps.
Lou

 

man thanks for all the help.