ok 2 minor problems
Thread Starter
Junior Member
Joined: Jul 2010
Posts: 35
Likes: 0
From: north texas
Car: 1985 firebird
Engine: v6
Transmission: turbo auto
Axle/Gears: ?hellifiknow?
ok 2 minor problems
when i turn on my windsheild wipers they open all the way then they all the way back down but on the 2nd cycle it shuts fully then it opens again but it doesnt want to any further they are going in the position on and off and staying that way till i turn the car off then back on, the other problem is that the power locks on the doors dont lock all the way when i push the button, you see them move but they are still unlocked can yall help me please.
Banned
Joined: Mar 2010
Posts: 474
Likes: 0
From: In my garage next to my car
Car: 89 Red IROC
Engine: 5.7
Transmission: 700R4
Axle/Gears: 2.77
Re: ok 2 minor problems
The first part of your long winded question I cannot fully understand. Texan must be like a foreign language to me.
The last part sounds like its just something gummed up in the soleniods or binding inside the door panels.
Start by removing the **** that you see not moving all the way from the rod its on. See if the locks work fully then. I had that plastic trim panel that was warped holding one lock from fully locking and unlocking. It would work if I kept hitting the button and little by little it would move.
The last part sounds like its just something gummed up in the soleniods or binding inside the door panels.
Start by removing the **** that you see not moving all the way from the rod its on. See if the locks work fully then. I had that plastic trim panel that was warped holding one lock from fully locking and unlocking. It would work if I kept hitting the button and little by little it would move.
Thread Starter
Junior Member
Joined: Jul 2010
Posts: 35
Likes: 0
From: north texas
Car: 1985 firebird
Engine: v6
Transmission: turbo auto
Axle/Gears: ?hellifiknow?
Supreme Member
Joined: Jan 2006
Posts: 3,341
Likes: 10
From: Mooresville NC
Car: LOWERED ♦ CRIMSON METALFLAKE
Engine: ► 400 KUBES ◄
Transmission: 765R4
Axle/Gears: EATON POSI 4.56
His Post Is Kind Of Squibbled
If the problem occurs when the wiper switch is in the HI position, turn the wiper switch to the OFF position, then open the wiper motor cover.
Disconnect the 2 pin connector going to the motor, and the 1 pin connector going to ground.
Keep the wiper switch in the OFF position for all these measurements.
Insert a voltmeter in line with the 2 pin connector purple wire and ground.
Turn the ignition key to the ACCY position.
What voltage does the meter indicate?
Now insert the voltmeter in line with the 1 pin connector gray wire and ground.
What voltage does the meter indicate?
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
How bout those too scared to drive without headlights in the daytime
and the ones that need headlights for a little rain
.
Disconnect the 2 pin connector going to the motor, and the 1 pin connector going to ground.
Keep the wiper switch in the OFF position for all these measurements.
Insert a voltmeter in line with the 2 pin connector purple wire and ground.
Turn the ignition key to the ACCY position.
What voltage does the meter indicate?
Now insert the voltmeter in line with the 1 pin connector gray wire and ground.
What voltage does the meter indicate?
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
How bout those too scared to drive without headlights in the daytime
and the ones that need headlights for a little rain.
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
Dec 10, 2019 07:07 PM
Hotrodboba400
Firebirds for Sale
0
Sep 2, 2015 07:28 PM
