Tacho issue on '84 T/A
Thread Starter
Member
Joined: Apr 2011
Posts: 128
Likes: 0
From: Adelaide
Car: '84 Trans Am
Engine: 305
Transmission: Auto
Tacho issue on '84 T/A
Hi all.
First time poster.
I have an '84 T/A right hand drive converted for here in Australia.
Im slowly starting to get to grips with it, but one thing that is annoying me right now is the Tacho. Its a 5.0l carby engine.
When I turn the ignition on, it twitches, but when the car fires up, it spins all the way round and sits there, going nowhere.
Obviously it is wired somewhere along the line, but has anyone got any ideas what I can do?
The tacho and oil pressure gauge are the only two not working.
Well, the speedo does, but it bounces around, but thats for another day!
Cheers all
Jono
First time poster.
I have an '84 T/A right hand drive converted for here in Australia.
Im slowly starting to get to grips with it, but one thing that is annoying me right now is the Tacho. Its a 5.0l carby engine.
When I turn the ignition on, it twitches, but when the car fires up, it spins all the way round and sits there, going nowhere.
Obviously it is wired somewhere along the line, but has anyone got any ideas what I can do?
The tacho and oil pressure gauge are the only two not working.
Well, the speedo does, but it bounces around, but thats for another day!
Cheers all
Jono
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Re: Tacho issue on '84 T/A
https://www.thirdgen.org/forums/inte...eedo-woes.html
JamesC
Thread
Thread Starter
Forum
Replies
Last Post