rear marker and tail out? (only driver side)
Thread Starter
Junior Member
Joined: Mar 2012
Posts: 32
Likes: 0
From: Kannapolis NC
Car: 89 firebird(going full TA custom)
Engine: sbc 383...LSX swap...in wrks
Transmission: 4L80E
Axle/Gears: 94 ws6 rear, 3:42 gears
rear marker and tail out? (only driver side)
It's happened a time or two but came back on normal...put steering column back in and now the driver back corner is out(running lights). Short somewhere, bad connection, idk? Srry if topic has been posted already...
Supreme Member
Joined: Jan 2006
Posts: 3,341
Likes: 10
From: Mooresville NC
Car: LOWERED ♦ CRIMSON METALFLAKE
Engine: ► 400 KUBES ◄
Transmission: 765R4
Axle/Gears: EATON POSI 4.56
Remarkable
First make sure the left rear marker light socket is grounded.
If it is, you have a bad connection from that left socket, to the tie point on the harness, most likely at the left taillight socket.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
8 Wheels Corner Better Than 4, If You’re On The Outside You Have Fair Warning
If it is, you have a bad connection from that left socket, to the tie point on the harness, most likely at the left taillight socket.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
8 Wheels Corner Better Than 4, If You’re On The Outside You Have Fair Warning
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
Exterior Parts for Sale
5
Apr 4, 2016 12:50 PM