2.8v6 hard to start when cold but runs fine after warm
Thread Starter
Junior Member
Joined: Jan 2013
Posts: 2
Likes: 0
2.8v6 hard to start when cold but runs fine after warm
I have a 86 Camaro with a 2.8 V-6. I had problems with overheating. I added a aftermarket fan controller. I removed the small sending unit from the intake to install the fan controller sensor. I also installed a mechanical temp gauge. I removed the sending unit from the front of the head behind the AC compressor. When I first start it it want stay running without patting the gas pedal. IF I try to drive before it warms up I hear popping under the hood. After it warms up it runs fine. I have seen some things about the cold start system. I don't know much about this system. Can anyone help with this problem? PLEASE
Supreme Member
Joined: Jan 2006
Posts: 3,341
Likes: 10
From: Mooresville NC
Car: LOWERED ♦ CRIMSON METALFLAKE
Engine: ► 400 KUBES ◄
Transmission: 765R4
Axle/Gears: EATON POSI 4.56
Scan Plan
Scan for codes then post the numbers.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
I Hit The Water Barrels Because My Car Was Dirty
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
I Hit The Water Barrels Because My Car Was Dirty
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
Mar 5, 2017 06:37 PM
