I'm putting this 89 Iroc back to original and came across some wires that had been cut. I need help figuring out what these are/where they go.
Are there plugs missing or what? Any help appreciated.

 

Looks like pink, white read and blue.

Looking at the location, the pink and white would likely be coil connections. The pink should have 12V power when the key is on and in the start positions, if it is for the coil. The white would connect to the tach, so performing a continuity test between the end of this wire and the tach pin at the cluster will verify that.

I'm not sure what the red and blue wires are for.

 

Thanks for the reply.
Near the distributer-one wire is gray and the other is red w/ black stripe.

The bigger wires located near the top is a big light red, big red, big black, small blue w/ black stripe and a white one.

The wires going to the fan/ac has also been cut. There is a big red and a big black wire in that cluster. Could these possibly lead to those?