Starting issues
Thread Starter
Supreme Member
Joined: Nov 2004
Posts: 1,347
Likes: 0
From: Connecticut
Car: 86 IROC w/Danko bodykit, 1988 iroc vert, 1989 k1500 pickup 6" lift and 35" tires, 2002 chevy tahoe z71
Engine: 383 stealth ram, 305 tpi, 350 tbi, 5.3l
Transmission: T56, 700r4, 700r4, 4l460
Starting issues
Hey guys long story short I replaced my dash harness an now car won't crank. Where should I start to look for. When I turn the key the fuel pump starts but I am running an xfi unit.car just won't crank. Is there something I should be looking for in the harness itself. My car is a five speed (well t56) if the harness I put in is from an automatic tranny is there something I need to jump out. Also how can I tell if I have a bad ignition switch. Car is a 86 camaro and the replacement harness came out of an 86 also. I matched up all o the connectors on the bulk head and they were the ame as my old harness
Thread Starter
Supreme Member
Joined: Nov 2004
Posts: 1,347
Likes: 0
From: Connecticut
Car: 86 IROC w/Danko bodykit, 1988 iroc vert, 1989 k1500 pickup 6" lift and 35" tires, 2002 chevy tahoe z71
Engine: 383 stealth ram, 305 tpi, 350 tbi, 5.3l
Transmission: T56, 700r4, 700r4, 4l460
Re: Starting issues
ok i got it figured out. no worries
Thread Starter
Supreme Member
Joined: Nov 2004
Posts: 1,347
Likes: 0
From: Connecticut
Car: 86 IROC w/Danko bodykit, 1988 iroc vert, 1989 k1500 pickup 6" lift and 35" tires, 2002 chevy tahoe z71
Engine: 383 stealth ram, 305 tpi, 350 tbi, 5.3l
Transmission: T56, 700r4, 700r4, 4l460
Re: Starting issues
Harness must of been from an auto tranny. Had to jumper the switch to the starter
Thread
Thread Starter
Forum
Replies
Last Post