2.8L swap to 355 carb engine

Reply Subscribe

Thread Tools

Search this Thread

Mar 13, 2013 | 09:46 AM

90camaro355rs

Thread Starter

Member

Joined: Mar 2013

Posts: 325

Likes: 0

From: gladstone

Car: 72 nova/ 90 camaro rs,04 suburban

Engine: blown 327/ 355/306/355/5.3

Transmission: muncie 4 speed/T5/powerglide,4l80e

Axle/Gears: 342/411/456/ moser axles

2.8L swap to 355 carb engine

I have a 90 camaro rs that had a 3.1 v6, engine and trans was not in the car when I got it, none of the wiring either, I put the wiring harness in the dash and the engine compartment, I am not new to cars at all, I am stumped on this though. Everything in the cluster works except the fuel guage, does the ecu/ecm need to be plugged up in order for the fuelguage to work? Wires are connected at the fuel sending unit and connector under the carpet inthe back. I have checked all fueses in fuse box. Does the grey wire going to the ecm need to have power? Anyhelp would be awesome, I thank you ahead of time! Tim

Last edited by 90camaro355rs; Mar 14, 2013 at 07:38 PM. Reason: wrong info