Pricing estimate for new computer and engine wiring harness?
Thread Starter
Junior Member
Joined: Mar 2013
Posts: 2
Likes: 0
Car: 86 Trans Am
Engine: Carbureted 305
Pricing estimate for new computer and engine wiring harness?
Hi,
Just found a 1990 firebird on craigslist with a 305 TPI and a 5 speed in it so naturally, I was intrigued. The only thing is it says it needs a new computer and harness for a quick fix. I have done a little research and seen harnesses for up to 500 online and computers for around 100. I am just looking for someone who knows more than me to confirm these are accurate and maybe give a rough estimate of what a shop would charge to replace these or the difficulty of doing it myself. Any advice would be appreciated! I don't want to waste money on this car! Thanks in advnce.
Just found a 1990 firebird on craigslist with a 305 TPI and a 5 speed in it so naturally, I was intrigued. The only thing is it says it needs a new computer and harness for a quick fix. I have done a little research and seen harnesses for up to 500 online and computers for around 100. I am just looking for someone who knows more than me to confirm these are accurate and maybe give a rough estimate of what a shop would charge to replace these or the difficulty of doing it myself. Any advice would be appreciated! I don't want to waste money on this car! Thanks in advnce.
Joined: Sep 2003
Posts: 25,895
Likes: 429
From: Pittsburgh PA
Car: 89 Iroc-z
Engine: 555 BBC Turbo
Transmission: TH400
Axle/Gears: MWC 9” 3.00
Re: Pricing estimate for new computer and engine wiring harness?
No. Can get a used ecm for 30-60$ and harness from a car for 100-200, used take outs.
Now with the ecm you need the chip prom, which for a 305 can be had for 20-50$ i would say. Last 305 one i bought was 50$ i think.
Not hard to replace just gotta label eAch connector and plug it all in.
Now with the ecm you need the chip prom, which for a 305 can be had for 20-50$ i would say. Last 305 one i bought was 50$ i think.
Not hard to replace just gotta label eAch connector and plug it all in.
Member
iTrader: (2)
Joined: Sep 2010
Posts: 297
Likes: 0
From: Buffalo NY
Car: 1985 Trans AM
Engine: 350 ATK Performance
Transmission: T56
Axle/Gears: Eaton 3.73
Re: Pricing estimate for new computer and engine wiring harness?
I have a 165 ECM I could sell you for $80 shipped
Joined: Dec 2004
Posts: 16,694
Likes: 979
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Pricing estimate for new computer and engine wiring harness?
I have a 90-92 firebird harness ecm and memcal, send me a pm if interested and I will list it in the classified section here. The ecm needed would be a 1227730
Thread
Thread Starter
Forum
Replies
Last Post











