Couple of gauge cluster questions
Thread Starter
Senior Member
Joined: Aug 2004
Posts: 991
Likes: 24
From: Peoria, AZ
Couple of gauge cluster questions
I'm getting ready to wire in some new gauges and want to make sure I have a couple of things correct since I'm not finding the answers readily on the wiring diagrams.
1. Turn signal and high beam indicators: does the harness wire provide power or ground to turn the lights on?
2. Check engine light: same question: is the signal from the ECM ground or power?
The rest of the signal wires for each gauge are easy to identify as are options for overall power and ground for the replacement gauges.
1. Turn signal and high beam indicators: does the harness wire provide power or ground to turn the lights on?
2. Check engine light: same question: is the signal from the ECM ground or power?
The rest of the signal wires for each gauge are easy to identify as are options for overall power and ground for the replacement gauges.
Supreme Member
Joined: Jan 2006
Posts: 3,341
Likes: 10
From: Mooresville NC
Car: LOWERED ♦ CRIMSON METALFLAKE
Engine: ► 400 KUBES ◄
Transmission: 765R4
Axle/Gears: EATON POSI 4.56
Cluster Fluster
The stock harness of course provides those things you mentioned.
Are you asking the question because you plan to replace a harness?
If no, you don’t have to worry about the Service Engine Soon light, signals or ☼ indicators.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
“Help” Me Into The Wall This Week, I’ll Just “Help” You Into The Wall Next Week
Are you asking the question because you plan to replace a harness?
If no, you don’t have to worry about the Service Engine Soon light, signals or ☼ indicators.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
“Help” Me Into The Wall This Week, I’ll Just “Help” You Into The Wall Next Week
Thread Starter
Senior Member
Joined: Aug 2004
Posts: 991
Likes: 24
From: Peoria, AZ
Re: Cluster Fluster
Replacing it all with aftermarket gauges and wiring LED's in for the turn signals, high beam indicator, and SES light so I want to hook them up correctly.
If I'm reading the diagram correctly, the turn signals and high beam indicator are a 12v signal and the SES light gets ground from the ECM. But I'd like to confirm this before wiring it all in and finding out its all reversed.
If I'm reading the diagram correctly, the turn signals and high beam indicator are a 12v signal and the SES light gets ground from the ECM. But I'd like to confirm this before wiring it all in and finding out its all reversed.
Supreme Member
Joined: Jan 2006
Posts: 3,341
Likes: 10
From: Mooresville NC
Car: LOWERED ♦ CRIMSON METALFLAKE
Engine: ► 400 KUBES ◄
Transmission: 765R4
Axle/Gears: EATON POSI 4.56
Cluster Fluster
Originally Posted by Beater79TA
…….the turn signals and high beam indicator are a 12v signal…….
Originally Posted by Beater79TA
…….the SES light gets ground from the ECM.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
“Help” Me Into The Wall This Week, I’ll Just “Help” You Into The Wall Next Week
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
Apr 25, 2016 09:21 PM
