intellitronx dash fuel gauge problems
Thread Starter
Junior Member
iTrader: (1)
Joined: Aug 2013
Posts: 51
Likes: 0
From: Savage, MN
Car: '87 Camaro
intellitronx dash fuel gauge problems
Sorry for posting this in the carburetor section.
I just used a multi meter on the one wire coming out of the gas tank (because my car was swapped to a carb 350 by the last owner) and found that it was reading 69.5 ohms. When i measured the voltage on the pink wire coming from the dash it measured 5 volts. I thought the gas tanks operated on about 3 volts. If thats true how could i lower the current?
I just used a multi meter on the one wire coming out of the gas tank (because my car was swapped to a carb 350 by the last owner) and found that it was reading 69.5 ohms. When i measured the voltage on the pink wire coming from the dash it measured 5 volts. I thought the gas tanks operated on about 3 volts. If thats true how could i lower the current?
Thread
Thread Starter
Forum
Replies
Last Post
Ghettobird52
Tech / General Engine
16
Jul 5, 2024 11:18 PM