so my car seems to have a gremlin. All seems well, the car will crank, the fuel pump clicks on, the injectors have pressure (I have an aftermarket regulator with a gauge), the injectors work (I have applied power to them directly) but they do not fire when cranking. I was able to get the car to run by cranking while spraying brake cleaner into the intake. Once the engine fired and ran for a few seconds, the injectors started working again. unfortunately this seems to have been a one trick pony as when I tried the same cheat again I was unable to get the injectors to kick on.

Thoughts?

Its gotta be a wiring issue or a problem with the ECU right? there arent any relays for the TBI injectors are there?