Battery Relocation
Thread Starter
Member
Joined: Nov 2013
Posts: 186
Likes: 1
From: Los Angeles
Car: 2004 Mazda RX-8
Engine: 1.3l Renesis
Axle/Gears: \
Battery Relocation
Everyone seems to have their own way of doing this, I wanted to see if there is anything that I'm missing here?
Senior Member
Joined: Jun 2011
Posts: 839
Likes: 4
From: Melbourne, Australia
Car: 1988 IROC Camaro (RHD)
Engine: 350 ci L98 SBC
Transmission: T700
Axle/Gears: 9 bolt BW, Disk, Posi-traction
Re: Battery Relocation
I think 2 gauge will be too this for the main cable to the starter.
Not sure the fuse is a good idea either.
I bought a new LT1 terminal block from Hawks, mounted it on the inside of the fender and terminated the alternator cable there. From the block I ran a 4 gauge cable to the starter.
Not sure the fuse is a good idea either.
I bought a new LT1 terminal block from Hawks, mounted it on the inside of the fender and terminated the alternator cable there. From the block I ran a 4 gauge cable to the starter.
Thread
Thread Starter
Forum
Replies
Last Post