Coolant Temp Gauge Not Working Before and After LS swap
Thread Starter
Junior Member
Joined: Feb 2012
Posts: 26
Likes: 0
Coolant Temp Gauge Not Working Before and After LS swap
Okay my Coolant gauge in the 85 z did not work before we ls swapped it, and it still does not. We have the 98 coolant temp sensor and the PCM has a good reading of the engine temp verified by HPTuners.
So theres got to be an issue with just the gauge, anyway to trouble shoot it by taking the cluster apart ( common issues? ) or a way to purchase a gauge by itself, couldn't seem to find any on the 'bay...
So theres got to be an issue with just the gauge, anyway to trouble shoot it by taking the cluster apart ( common issues? ) or a way to purchase a gauge by itself, couldn't seem to find any on the 'bay...
Supreme Member
Joined: Jan 2006
Posts: 3,341
Likes: 10
From: Mooresville NC
Car: LOWERED ♦ CRIMSON METALFLAKE
Engine: ► 400 KUBES ◄
Transmission: 765R4
Axle/Gears: EATON POSI 4.56
Temper Tantrum
The pinned below zero is consistent with a broken wire in the circuit.
With the engine OFF, but the key in the RUN position, ground the sender wire, then look at the temp gage.
What does the gage do when that wire is grounded?
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing !
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
My Brakes Don’t Work AT ALL When The Car Is In The Air
With the engine OFF, but the key in the RUN position, ground the sender wire, then look at the temp gage.
What does the gage do when that wire is grounded?
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing !
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
My Brakes Don’t Work AT ALL When The Car Is In The Air
Thread
Thread Starter
Forum
Replies
Last Post
Ghettobird52
Tech / General Engine
16
Jul 5, 2024 11:18 PM