Pick up coil interchangeability
Thread Starter
Junior Member
Joined: Aug 2016
Posts: 6
Likes: 0
Pick up coil interchangeability
Can i use the pick up coil from a 229 even fire chevy v6 in a sbc v8 non-ccc dizzy? That is, of course, swapping the pick up coil only and keeping the v8 pole piece.
thanks for the input
thanks for the input
Joined: Dec 2004
Posts: 16,752
Likes: 996
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Pick up coil interchangeability
Do a part number search on rockauto.com to see if both applications use the same pu coil.
Joined: Jul 2000
Posts: 6,521
Likes: 91
From: Aridzona
Car: `86 SS / `87 SS
Engine: L69 w/ TPI on top / 305 4bbl
Transmission: `95 T56 \ `88 200-4R
Re: Pick up coil interchangeability
I don't know.
If you start by checking a PN for the application that uses the 229 (G-body) and the PN for the SBC application, that might be a hint.
Also, Hollanders interchange books, used by salvage yards are helpful; they may have an online version to try.
If you start by checking a PN for the application that uses the 229 (G-body) and the PN for the SBC application, that might be a hint.
Also, Hollanders interchange books, used by salvage yards are helpful; they may have an online version to try.
Thread Starter
Junior Member
Joined: Aug 2016
Posts: 6
Likes: 0
Re: Pick up coil interchangeability
it seems every auto parts store sell the pick up coil and the pole piece as a unit. I just tried and the v8 seems to run fine with the v6 po coil. We'll see. Thanks guys
