GTA digital dash - conversion to factory analog (needle style) gauges?
Thread Starter
Joined: Sep 2016
Posts: 1,827
Likes: 236
From: Sunny Florida
GTA digital dash - conversion to factory analog (needle style) gauges?
Anyone convert their GTA digital dash to factory analog (needle type) gauges?
If so, how much time do you have into the conversion? How big a pain in the neck is this?
If so, how much time do you have into the conversion? How big a pain in the neck is this?
Member
iTrader: (1)
Joined: Apr 2013
Posts: 372
Likes: 0
From: Ohio
Car: 1987 Trans Am
Engine: 305 TPI
Re: GTA digital dash - conversion to factory analog (needle style) gauges?
Haven't done it but from stripping a car that had a digital dash I can tell you that all the wiring in the dash and engine bay will need changed (as far as I could tell) so that can be a pain to work on behind the dash. Best bet would be to install a complete dash from the analog gauge car with wiring ready to go to make sure there aren't any differences that you could miss.
Joined: Sep 1999
Posts: 4,353
Likes: 308
From: NJ
Car: 92 Firebird
Engine: 4.8 LR4
Transmission: T56
Axle/Gears: 3.45 9 Bolt
Re: GTA digital dash - conversion to factory analog (needle style) gauges?
Getting wiring from a complete car would be best/easiest, along with the dash carrier. Unless yours is damaged, it's really not worth the time and effort.
Thread
Thread Starter
Forum
Replies
Last Post
theMAGICALheat
Electronics
0
Sep 11, 2008 11:34 PM
