BraveTECH - Factory Window Switch Adapter (Auto Up/ Down) Plug N Play
Thread Starter
Former Sponsor
Joined: Jul 2022
Posts: 79
Likes: 17
From: Medicine Hat
Car: 1990 GTA
Engine: 5.7
BraveTECH - Factory Window Switch Adapter (Auto Up/ Down) Plug N Play
I designed these Plug N Play adapters that provide an Auto Up/Down Feature to your factory switches. It's fairy compact and fits well in the center console.
Available on my website: https://bravetech.ca/
Available on my website: https://bravetech.ca/
Joined: Feb 2003
Posts: 1,508
Likes: 63
From: Austin, Tx
Car: 91 Z28
Engine: LS1
Transmission: T-56
Axle/Gears: 3.73 Hawks 8.8
Re: BraveTECH - Factory Window Switch Adapter (Auto Up/ Down) Plug N Play
I was the one that mentioned wanting a more stock switch look, and you delivered. Order is placed!
Thread Starter
Former Sponsor
Joined: Jul 2022
Posts: 79
Likes: 17
From: Medicine Hat
Car: 1990 GTA
Engine: 5.7
Re: BraveTECH - Factory Window Switch Adapter (Auto Up/ Down) Plug N Play
Thank you @StevenK I really appreciate your business =)
I did design the programming to accommodate worn switches but please ensure your factory switches are new, or in good condition, internally.
It is a fairly new program, so if you have any troubles at all, please email me at Bravendirk@gmail.com
You can also Follow / Contact me on Facebook: BraveTECH Custom Electronics
I'm a very small business. I would really appreciate any and all sharing of my products =)
Background information, if you are curious: The programming was a bit of a task to write because worn out switches have "Dead Spots" when depressing the switch. My electronics are very precise and will see every "dead spot" that occurs while the factory switch transitions from a "Not Pressed" state to a "Pressed" state. The program will see this as pressing and releasing the switch very rapidly. I wrote the program to filter out this "noise" and provide a steady and reliable output.
Braven
I did design the programming to accommodate worn switches but please ensure your factory switches are new, or in good condition, internally.
It is a fairly new program, so if you have any troubles at all, please email me at Bravendirk@gmail.com
You can also Follow / Contact me on Facebook: BraveTECH Custom Electronics
I'm a very small business. I would really appreciate any and all sharing of my products =)
Background information, if you are curious: The programming was a bit of a task to write because worn out switches have "Dead Spots" when depressing the switch. My electronics are very precise and will see every "dead spot" that occurs while the factory switch transitions from a "Not Pressed" state to a "Pressed" state. The program will see this as pressing and releasing the switch very rapidly. I wrote the program to filter out this "noise" and provide a steady and reliable output.
Braven
Joined: Feb 2003
Posts: 1,508
Likes: 63
From: Austin, Tx
Car: 91 Z28
Engine: LS1
Transmission: T-56
Axle/Gears: 3.73 Hawks 8.8
Re: BraveTECH - Factory Window Switch Adapter (Auto Up/ Down) Plug N Play
Thank you @StevenK I really appreciate your business =)
I did design the programming to accommodate worn switches but please ensure your factory switches are new, or in good condition, internally.
It is a fairly new program, so if you have any troubles at all, please email me at Bravendirk@gmail.com
You can also Follow / Contact me on Facebook: BraveTECH Custom Electronics
I'm a very small business. I would really appreciate any and all sharing of my products =)
Background information, if you are curious: The programming was a bit of a task to write because worn out switches have "Dead Spots" when depressing the switch. My electronics are very precise and will see every "dead spot" that occurs while the factory switch transitions from a "Not Pressed" state to a "Pressed" state. The program will see this as pressing and releasing the switch very rapidly. I wrote the program to filter out this "noise" and provide a steady and reliable output.
Braven
I did design the programming to accommodate worn switches but please ensure your factory switches are new, or in good condition, internally.
It is a fairly new program, so if you have any troubles at all, please email me at Bravendirk@gmail.com
You can also Follow / Contact me on Facebook: BraveTECH Custom Electronics
I'm a very small business. I would really appreciate any and all sharing of my products =)
Background information, if you are curious: The programming was a bit of a task to write because worn out switches have "Dead Spots" when depressing the switch. My electronics are very precise and will see every "dead spot" that occurs while the factory switch transitions from a "Not Pressed" state to a "Pressed" state. The program will see this as pressing and releasing the switch very rapidly. I wrote the program to filter out this "noise" and provide a steady and reliable output.
Braven
Joined: May 2008
Posts: 416
Likes: 82
From: Viersen, Germany
Car: 85 Iron Duke, 88 GTA and 92 TA
Re: BraveTECH - Factory Window Switch Adapter (Auto Up/ Down) Plug N Play
Do you ship these worldwide? I bet I can activate some guys of our 150+ people WhatsApp group here in germany to order some of these...
Trending Topics
Joined: Oct 2001
Posts: 12,221
Likes: 1,141
From: Il
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: BraveTECH - Factory Window Switch Adapter (Auto Up/ Down) Plug N Play
Pretty darn cool. Cool stuff on your site to. Just add another project to my list
Thread
Thread Starter
Forum
Replies
Last Post
