350 Roller Block. Stock crank/rods. Hyperutectic pistons, flat top 4 relief. Mileage unknown, but its low. I checked all the main/rod bearings before I put it in my car, and they all looked perfect. Put mabey 1000 miles on it since. New oil pump and pan gasket.

Still has the cam in it. Crane PoweMax Hydraulic Roller, 234/242, .539/.558, 112lsa, 3500-6500. Awesome idle. New roller lifters and timing chain too.

Heads still on it. Trick Flow Kenny D Sig. Series. 64cc. Springs good to .600" Pocket ported and bowl blended. Correct length Trick Flow pushrods also included.

$1600. Pick up only. Youngstown,OH

 

The heads are 86-earlier. The block is 87-later.

 

The motor is out and ready to go. I will sell the shortblock, heads, and valvetrain seperetly. Or the shortblock with heads and no cam, etc...

$800 for the heads.
$450 for the shortblock
$250 for the cam and lifters
$40 for the pushrods. They're one size longer than stock, 6.25 or sumthin?

 

Where is the "Murdur Capitol of the World"?

DC? lol

 

Youngstown, Ohio. No longer holding that title, but we're making a come-back! lol

 

Pictures please. jeff@rummell.net

 

Ill have pics Monday

 

Specs on the heads please.

 

http://www.trickflow.com/product/che...r_23degree.asp

 

 

ttt yo!

 

so which part number are we looking at on trick flows page.... cc size, spring specs? could possibly be interested in the heads

 

they're #TFS-30400003. They have about 1000miles on them. Perfect working conditon. Not somethin you find used very easily!

 

Ill trade/partial trade some of the parts for good quality firearms also.