this came from my 82 305 which had a 5 speed. will be surfaced prior to shipping which will cost me 26.00 bucks so anything over that plus the shipping charges and it's yours.

all the teeth are perfect was pulled because I put a 1 piece rear main 350 in the car, I believe it to be a 164 tooth flywheel .... however it was used with my 1987 5 speed and 1987 bellhousing

 

would you count the teeth for me ?

87 starter and stuff should be 153 i think

 

it's probably a 153 tooth flywheel then, I'm not going to count the teeth though LOL ... whatever a third gen came with is what this is, it was mounted to my 1982 305 .... I do know it will not work on a 1 piece rear main seal engine.

I've got a few PM'S about this flywheel but is not from a 4 speed. My car was originally a automatic car that got a 5 speed conversion. this flywheel will fit any 82-early 86 block

 

ill take the flywheel if you still have it....

 

measure the diameter

there were only two

12.5 and 14"

12.5 was 153

14 was 168