WC t5 conversion/373 rear end/ SD TPI + more
Senior Member
iTrader: (3)
Joined: Jul 1999
Posts: 816
Likes: 0
From: Mechanicsburg, PA
Car: '89 Formula 350
Engine: 5.7L L98 TPI
Transmission: 700-R4 Automatic
Axle/Gears: 7.5 disc posi 3.23
Headers and rear end.
Hello,
I am interested in the headers and the rear. Unfortunately I cannot afford to ship the rear. I was wondering if you would sell the posi and gears only? I am also interested in the SLP headers and Y pipe. What is the part number or primary tube size and material? Do you have any pictures of either of these items??
Thanx,,Tom
I am interested in the headers and the rear. Unfortunately I cannot afford to ship the rear. I was wondering if you would sell the posi and gears only? I am also interested in the SLP headers and Y pipe. What is the part number or primary tube size and material? Do you have any pictures of either of these items??
Thanx,,Tom
Thread Starter
Junior Member
Joined: Mar 2002
Posts: 33
Likes: 0
From: Milwaukee
I can separate the rear. Pics will come this weekend. The Slp headers are a couple years old. They are stainless * non coated. I will have to check them for the primary size
Thanks
Thanks
Member
Joined: Jun 2006
Posts: 385
Likes: 5
From: WI
Car: 89 Trans am
Engine: 5.7 TPI
i may be interested in the dynomax exuast. im in fond du lac and could pic it up myself if i were interested. what is all included in a 'full' exaust? what kind of muffler is on it, what condition is it in, and could you get any pics up?
thanks
thanks
Trending Topics
On Probation
Joined: Apr 2006
Posts: 491
Likes: 0
From: Albany, NY
Car: 1992 Pontaic Firebird
Engine: 3.1L
Transmission: auto
Axle/Gears: 4 spd
interested in the wheels can u send me some pics?
Parts sale
10bolt - out of 91 formula - converted over to 373 torsen posi unit - discs
complete - $250
91 Speed Density Set up - base, injectors, runners, TB, sensors, ecm and prom - complete minus harness - $250
WC t5 conversion. pedals, clutch, shifter, one piece flywheel, sensors - complete 91k miles - $500
Slp Stainless headers with Ypipe and new 02 sens- make offer
Full 3" dynomax exhaust - used $50
Original 323posi for 10bolt with ring and pinion - under 90k - $100
97 Firebird seats - no tears - gray - pretty nice - Make offer$
16" Formula Wheels and tires - center caps - tires have a lot of life
- 100$
Hatch for 91 w/spoiler and 3rd brake light
150$
All parts are in Pewaukee, WI
I accept paypal
I will ship the smaller items
Thanks
Email pwoboril@uwm.edu for pics
10bolt - out of 91 formula - converted over to 373 torsen posi unit - discs
complete - $250
91 Speed Density Set up - base, injectors, runners, TB, sensors, ecm and prom - complete minus harness - $250
WC t5 conversion. pedals, clutch, shifter, one piece flywheel, sensors - complete 91k miles - $500
Slp Stainless headers with Ypipe and new 02 sens- make offer
Full 3" dynomax exhaust - used $50
Original 323posi for 10bolt with ring and pinion - under 90k - $100
97 Firebird seats - no tears - gray - pretty nice - Make offer$
16" Formula Wheels and tires - center caps - tires have a lot of life
- 100$
Hatch for 91 w/spoiler and 3rd brake light
150$
All parts are in Pewaukee, WI
I accept paypal
I will ship the smaller items
Thanks
Email pwoboril@uwm.edu for pics
Senior Member
iTrader: (2)
Joined: Sep 2004
Posts: 696
Likes: 0
From: East Haven, Connecticut
Car: 89 Camaro/ 02 GC Overland
Engine: 355 V8/ 4.7 HO V8
Transmission: T5/ 545RE
Axle/Gears: 10 Bolt 3.73/ Dana 30, Dana 44 3.73
interested in the tpi setup and all the parts included with it. can i get some pics, what kinda condition is it in? 7730 ECM right? what memcal is in the ECM?
matt
matt
Thread Starter
Junior Member
Joined: Mar 2002
Posts: 33
Likes: 0
From: Milwaukee
Sorry Guys, I have been out of town and just changed jobs....so my reponses have been slow to non existent. Pics to come in next day or two. I just sent a ton of PMs so check them.
Thanks
Thanks
Member
iTrader: (2)
Joined: Jan 2006
Posts: 258
Likes: 0
From: Lansing, IL
Car: 64 Impala, 86 Z28 Camaro, 00 C5 FRC
Hey, i noticed you said you would seperate the rear end. Does this have the pbr calipers on it? Im interested in the brake lines and if you possibly still have them, the emergency brake cables as well. If you could get back to me as soon as possible, my sister goes to school at carroll college and would probably be willing to pick them up for me. Ill pm you my number.
Thanks
-richard
Thanks
-richard
Thread
Thread Starter
Forum
Replies
Last Post
1992rs/ss
NW Indiana and South Chicago Suburb
14
Jan 31, 2025 05:10 PM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 12, 2015 03:41 PM