I have a set of #882 heads from '74 corvette they have been disassembled and heads were jet washed still have spring and valves/rockers. Looking for 50 bucks plus shipping but will entertain trading for something else. Also have 6 275/60-15 firestone firehawks that are fair 2 275/60-15 that have been burned hard at the track {8 total} one set is of ss10 and one set of ss20 50 bucks for all perfer pickup but will be in the cincy area of ohio on Labor day so can deliver. I also have a #010 engine block from same vette forged .030 over bore 4 bolt main will entertain offers this is one of the best blocks out there I have been told and really hate to part with it.

 

Checked the casting #'s because someone here said the 882 didn't come on vette's and your right this is a set of 400 heads took them off just thought they were original the true casting #3932882 came from 1976 but I have no idea what from they have 1.94/1.50 valves if no one is interested I will just keep them.

 

Thanks for all the replies boy I just can't give stuff away after surfing several other threads I guess everyone just likes to spend alot of money. So I am keeping the heads and the block sold my project car already and gotten another one {from here, I might add}. Thanks again for beating down my door, I guess a pic is worth a thousand words.

 

Dont be pissed cause no one wanted to buy what your selling.

 

I'm not but I'll be darned if I give it away as some people who have PM'd have wanted.

 

Might have better luck selling these at NastyZ28 Home Page

Lots of guys there restore the older 2nd gen cars that those heads would be appropriate for. You'll have better luck there I bet

 

No I am going to keep them my local machine shop is going to install 2.05/1.6 valves an port them for me for $80 you can't beat that with a stick and then I'm gonna put them back on my #010 forged block that will be bored another .030 to make it .060 with a 383 crank also forged as well as lightwieght from texasperformanceproducts.com I just need some 5.7 or 6 inch rods and new pistons but those will come already have a dual 4 barrel tunnel ram that I'm thinking of using or maybe just a good dual plane edelbrock performer and a good cam and thats it but to tell you the truth I won't sell the heads for $25 and pay shipping thats like paying someone to take them off my hands just becuase I don't have pics of my parts doesn't mean they are not good I've bought stuff from here and ebay that look nothing like their picture. So no I think I'll just keep everything.