Carb, complete 350, 700r4 that I need GONE
Thread Starter
Senior Member
iTrader: (3)
Joined: Mar 2006
Posts: 690
Likes: 0
From: NY
Car: 86 Iroc
Engine: 383
Transmission: TH350
Axle/Gears: 3:73s!
Carb, complete 350, 700r4 that I need GONE
I have a GM performance parts 350 with 350 flywheel HP - would like to get 1200, obo
I have a Holley 600 single pump carb - would like to get 200 shipped, obo
700r4 that i took out of a doner car, not sure of condition- 75 obo
Have a pair of tan seats from a 86 IROC, no stains, pass side perfect, driver side has a 1 inch rip, Best offer
14x2 K and N air filter -35 shipped/ 30 picked up
I would rather not ship the engine/trans/seats because shipping is a pain and expensive, but if need be, we can work something out.
I have a Holley 600 single pump carb - would like to get 200 shipped, obo
700r4 that i took out of a doner car, not sure of condition- 75 obo
Have a pair of tan seats from a 86 IROC, no stains, pass side perfect, driver side has a 1 inch rip, Best offer
14x2 K and N air filter -35 shipped/ 30 picked up
I would rather not ship the engine/trans/seats because shipping is a pain and expensive, but if need be, we can work something out.
Last edited by 86camaro383; Sep 27, 2006 at 09:34 PM.
Thread Starter
Senior Member
iTrader: (3)
Joined: Mar 2006
Posts: 690
Likes: 0
From: NY
Car: 86 Iroc
Engine: 383
Transmission: TH350
Axle/Gears: 3:73s!
Im located in Pine Bush NY, zip 12566. Looks like your in long island, could be a 1 1/2 -2 hour drive depending where you are in LI.
Thread Starter
Senior Member
iTrader: (3)
Joined: Mar 2006
Posts: 690
Likes: 0
From: NY
Car: 86 Iroc
Engine: 383
Transmission: TH350
Axle/Gears: 3:73s!
809-12499529 Thats the jegs part number. It has about 5000 miles on it, I took it out to do a 383 stroker. I put a bigger cam in, I dont remember the specs, I have to search around for the cam card. Its got porting and poilishing, and the heads have been shaved to 68 cc's. (stock was 76 or something like that) It comes complete for the exception of carb. As of right now, it is timed at 36* total advance. It has a stock HEI distributer in it, with MSD coil. It has a edelbrock performer intake manifold...
Trending Topics
Senior Member
iTrader: (4)
Joined: Feb 2003
Posts: 872
Likes: 1
From: Weedsport, NY
Car: 1986 Camaro SC
Engine: Bolt-on/cam 305
Transmission: 700R4 w/ 2500stall
Axle/Gears: 3.73 10bolt Posi
809-12499529 Thats the jegs part number. It has about 5000 miles on it, I took it out to do a 383 stroker. I put a bigger cam in, I dont remember the specs, I have to search around for the cam card. Its got porting and poilishing, and the heads have been shaved to 68 cc's. (stock was 76 or something like that) It comes complete for the exception of carb. As of right now, it is timed at 36* total advance. It has a stock HEI distributer in it, with MSD coil. It has a edelbrock performer intake manifold...
I saw in another of your threads you're interested in helping others with their cars, I'd take you up on that.
Last edited by atc3434; Oct 23, 2006 at 01:43 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
Jun 13, 2021 01:13 PM
theshackle
Tech / General Engine
4
Mar 5, 2017 06:37 PM






