Hooker Ceramic Comp Headers with A.I.R. Setup
Thread Starter
Junior Member
Joined: Feb 2006
Posts: 65
Likes: 0
From: Long Island, NY
Car: '88 IROC
Engine: 350 TPI
Transmission: T-5
Axle/Gears: 9", Locker, 4.10's
Hooker Ceramic Comp Headers with A.I.R. Setup
Whats up guys.
I got special ordered Hooker Comp Headers with the AIR tubes on them for anyone who wants them. They have the hole drilled in them for the O2 sensor and are ready to install. I had them installed previously on my old motor. They are still in good condition, Ceramic headers don't really lose their luster.
I had ordered them for about 550 new from Summit, but I am only looking for 300 plus S&H. I will ship UPS with insurance if requested by the buyer.
Anyone interested please contact me (Tim) by EMAIL at tpm2@dowling.edu .
Take care.
I got special ordered Hooker Comp Headers with the AIR tubes on them for anyone who wants them. They have the hole drilled in them for the O2 sensor and are ready to install. I had them installed previously on my old motor. They are still in good condition, Ceramic headers don't really lose their luster.
I had ordered them for about 550 new from Summit, but I am only looking for 300 plus S&H. I will ship UPS with insurance if requested by the buyer.
Anyone interested please contact me (Tim) by EMAIL at tpm2@dowling.edu .
Take care.
Senior Member
iTrader: (3)
Joined: Jul 1999
Posts: 816
Likes: 0
From: Mechanicsburg, PA
Car: '89 Formula 350
Engine: 5.7L L98 TPI
Transmission: 700-R4 Automatic
Axle/Gears: 7.5 disc posi 3.23
Pics? Any pictures or a part number? Was the Y pipe welded? Does it come with cats?
Thread Starter
Junior Member
Joined: Feb 2006
Posts: 65
Likes: 0
From: Long Island, NY
Car: '88 IROC
Engine: 350 TPI
Transmission: T-5
Axle/Gears: 9", Locker, 4.10's
2460-1, but it has the AIR tubing on it. E-mail me for pics.
Pipe was not welded in any way, and does not come with y-pipe, or cats.
Pipe was not welded in any way, and does not come with y-pipe, or cats.
Trending Topics
Senior Member
iTrader: (3)
Joined: Jul 1999
Posts: 816
Likes: 0
From: Mechanicsburg, PA
Car: '89 Formula 350
Engine: 5.7L L98 TPI
Transmission: 700-R4 Automatic
Axle/Gears: 7.5 disc posi 3.23
I think $300 is too much. These sell new from Summit for $350. What y pipe were you using? Here is the summit page for Hooker 2460-1 headers.
Hooker Competition Headers: HOK-2460-1HKR - summitracing.com
Hooker Competition Headers: HOK-2460-1HKR - summitracing.com
Thread Starter
Junior Member
Joined: Feb 2006
Posts: 65
Likes: 0
From: Long Island, NY
Car: '88 IROC
Engine: 350 TPI
Transmission: T-5
Axle/Gears: 9", Locker, 4.10's
I think $300 is too much. These sell new from Summit for $350. What y pipe were you using? Here is the summit page for Hooker 2460-1 headers.
Hooker Competition Headers: HOK-2460-1HKR - summitracing.com
Hooker Competition Headers: HOK-2460-1HKR - summitracing.com
Senior Member
iTrader: (3)
Joined: Jul 1999
Posts: 816
Likes: 0
From: Mechanicsburg, PA
Car: '89 Formula 350
Engine: 5.7L L98 TPI
Transmission: 700-R4 Automatic
Axle/Gears: 7.5 disc posi 3.23
WOW!!! $200 to have air tubes welded on when most people want them removed. Ouch 
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
Dec 10, 2019 07:07 PM
Hotrodboba400
Firebirds for Sale
0
Sep 2, 2015 07:28 PM
IROCZDAVE (88-L98)
Engine/Drivetrain/Suspension Parts for Sale
0
Sep 2, 2015 08:49 AM
