let me know what you need

 

sent a PM

 

Is this the one that I spoke to you about getting the engine out of?

 

I need the front two rotors and spindles.

 

no. i sold the motor from the 88 iroc. it ended up needing a couple of fuel injectors. this is another. i'm gonna attempt to put a battery in it tomorrow and see what it sounds like.

 

I need teh chip and is it has a serp belt setuip. let me know

 

it does have the serpintine setup. $100 plus shipping. it has a hyperchip. $55 shipped

 

Does it have a black interior?

 

it has gray with black seats

 

Sorry if this is a stupid question, but is it a tpi or tbi engine? If it is tpi I may be interested in the serpentine setup if rv1890 passes on it. Do you have any pics?

 

If you're willing to part the engine...how much for just the heads?

 

its tpi. all 5.7's are. send e-mail for pics

 

You have a PM with my email address!!

 

I need the front two rotors and spindles.

 

do you have the aircleaner box and both rubber bellows? i have a MAF but no bellows or aircleaner assembly to complete my swap. pictures would be nice, let me know

 

$30 plus shipping for all elbows and airbox
----------
i would need your e-mail for pics

 

still got chip??

 

i still have the chip.

 

is it the stock 5.7 89/no 9th injector, automatic chip??
and if so how much you looking to get for it??

 

Are you ignoring me?

 

89 5.7 stock. automatic. hyperchip. $55 shipped

 

hey the boards didnt email me when you responded...dont know why it does that... ill take both the bellows and air box. you said 30 right? got a picture of the stuff? is the PCM complete? you said is has that hypertech chip soldered in there...or is the chip seperate? im in need of a PCM from and 89 without that 9th injector junk programmed in there...

 

how much for the duel fans & brackets shipped to 07424

 

what kind of rear axle do you have? i'm in need of the 89 and up rear brake set up. if you have the right kind of axle i'll just swap the whole thing in my GTA.

 

i just realized who you are 89iroc. i bought that TPI engine off you last summer and you gave me that tarp to throw over it because it was raining. BTW you gave me the wrong PCM with that engine and it wasnt from an 89 GTA it was from an 87 iroc and the pcm is from a 5.0 z28 and is usless to me lol. didnt realize that till last week when i swapped the engine into my truck. how bout helping me in finishing my project and getting back to me on the intake parts i need?

 

i'm trying to get a picture of them. i do have them on this 89 formula. trying to get camara to work.

 

but they are firebird bellows and air cleaner assembly not camaro parts correct?

 

looking for both rear calipers if you have a disc brake rear???

 

yes they are in this formula.
----------
calipers are $150 for pair. pbr aluminum.

 

got those air cleaner pics. need your e-mail to send them.

 

could you shoot me pics and price of center console,
steven.m.coogan.ctr@navy.mil

 

PM send 89iroc... remember i need the 90 degree bellow and the stright bellow as well as the air cleaner assembly

 

are you selling the front bumper cover? if so could I get pics. to joejoe3@att.net
how about a working fuel sendind unit?
thanks

 

i do have the front bumper but i wouldn't know how to ship something that big. the fuel sending unit is $50 shipped in the u.s.

 

do you still have the wiring harness? if so how much?

 

$150 shipped

 

do you have the passkey/vat box and ignition key?

 

what color is the car? hows the passenger side fender. and how much you asking?

 

it might be sold already but figured i would ask, do you have the TPI intake setup (intake and up) and computer?

Thanks for your time

 

you need the complete tpi intake with everything including injectors and computer. right? no harness? $300 with shipping

 

do you have the exhaust manifolds and y-pipe? are they stock? i'm interested.

 

not the y-pipe. the manifolds i have.

 

Do you have the dash wiring harness with the vats?

 

how much??

 

$60 shipped for the manifolds.

 

any chance you have pics?

 

i need a kickdown cable for a 700r4. thanks, shelby

 

$25 shipped for the kickdown.
----------
if you shot me you're e-mail. i'll send you pics of the manifolds tomorrow

 

How much do you want for the complete rear end?

 

ajm107@pitt.edu

thanks!