LT1 TPI HYBRID conversion parts
Thread Starter
Joined: May 2001
Posts: 386
Likes: 6
From: Silver Creek, GA
Car: 1989 Bright Red GTA
Engine: Grand Sport LT4
Transmission: T56
Axle/Gears: 10 bolt 3.73
LT1 TPI HYBRID conversion parts
Hey guys, up for sale this time:
1996 LT1 intake manifold This one has the distributor hole drilled, distributor shim attached. Complete with fuel rail and cleaned LS6 28lb injectors. Still has the LT1 mounting holes and no coolant passages. Has the throttle cable bracket for a 700r4 kickdown TV cable. $200 plus shipping
1996 Fbody LT1 accesories. Complete with a working AC compressor for R134, a working alternator, working power steering pump and most of the bolts. $200 plus shipping
A Comp Cams CC305 cam. 220 / 230, .510 / .510 114 LSA (specs with 1.5 rockers) EDIT This cam is NEW not used as I thought. I had it confused with my LT4 HOT cam that I sold. $150 plus shipping.
Brand new never run Procomp TPI distributor. Has the red cap and rotor, brass terminals. Complete, ready to run! $100 plus shipping.
Brand new LT1 corvette fuel rail covers. Clearanced for Fbody fuel rail and for the TPI distributor. $75 plus shipping.
I'll put up pics tomorrow or just PM me for any specific pics or details that you may need!
Check out my username on the Seller feedback back board, Kwik89GTA. I ship very fast and sell exactly what I list.
Paypal or USPS Money Orders.
KEVIN
1996 LT1 intake manifold This one has the distributor hole drilled, distributor shim attached. Complete with fuel rail and cleaned LS6 28lb injectors. Still has the LT1 mounting holes and no coolant passages. Has the throttle cable bracket for a 700r4 kickdown TV cable. $200 plus shipping
1996 Fbody LT1 accesories. Complete with a working AC compressor for R134, a working alternator, working power steering pump and most of the bolts. $200 plus shipping
A Comp Cams CC305 cam. 220 / 230, .510 / .510 114 LSA (specs with 1.5 rockers) EDIT This cam is NEW not used as I thought. I had it confused with my LT4 HOT cam that I sold. $150 plus shipping.
Brand new never run Procomp TPI distributor. Has the red cap and rotor, brass terminals. Complete, ready to run! $100 plus shipping.
Brand new LT1 corvette fuel rail covers. Clearanced for Fbody fuel rail and for the TPI distributor. $75 plus shipping.
I'll put up pics tomorrow or just PM me for any specific pics or details that you may need!
Check out my username on the Seller feedback back board, Kwik89GTA. I ship very fast and sell exactly what I list.
Paypal or USPS Money Orders.
KEVIN
Last edited by Kwik89GTA; May 4, 2007 at 04:16 PM.
Junior Member
iTrader: (1)
Joined: Feb 2006
Posts: 14
Likes: 0
From: Terrebonne,Canada
Car: 1988 Trans Am GTA
Engine: 350 LT1
Transmission: 4L60E
Axle/Gears: 3.70
Re: LT1 TPI HYBRID conversion parts
Hi Kevin,
How's 200$ shipped in Canada?If you're interested,can you send me pics at joetransam@hotmail.com.And also,is the distributor hole well aligned?
How's 200$ shipped in Canada?If you're interested,can you send me pics at joetransam@hotmail.com.And also,is the distributor hole well aligned?
Thread Starter
Joined: May 2001
Posts: 386
Likes: 6
From: Silver Creek, GA
Car: 1989 Bright Red GTA
Engine: Grand Sport LT4
Transmission: T56
Axle/Gears: 10 bolt 3.73
Re: LT1 TPI HYBRID conversion parts
Intake pics, I didnt unpack the injectors, but I will if a pic of grey injectors is needed.
Last edited by Kwik89GTA; May 4, 2007 at 03:33 PM.
Thread Starter
Joined: May 2001
Posts: 386
Likes: 6
From: Silver Creek, GA
Car: 1989 Bright Red GTA
Engine: Grand Sport LT4
Transmission: T56
Axle/Gears: 10 bolt 3.73
Re: LT1 TPI HYBRID conversion parts
Cam, brand new!
Fuel rail covers, brand new, never had the plastic off of the Vette emblems...
Fuel rail covers, brand new, never had the plastic off of the Vette emblems...
Last edited by Kwik89GTA; May 4, 2007 at 04:16 PM.
Thread Starter
Joined: May 2001
Posts: 386
Likes: 6
From: Silver Creek, GA
Car: 1989 Bright Red GTA
Engine: Grand Sport LT4
Transmission: T56
Axle/Gears: 10 bolt 3.73
Re: LT1 TPI HYBRID conversion parts
Distributor, brand new!
Accessories, not new but they all work great, could use a good cleaning.
Accessories, not new but they all work great, could use a good cleaning.
Junior Member
iTrader: (1)
Joined: Jan 2007
Posts: 44
Likes: 0
From: HT, INDIANA
Car: 91 CAMARO Z-28 G92
Engine: 305 TPI
Transmission: T-5
Axle/Gears: 3.42
Re: LT1 TPI HYBRID conversion parts
Is this ready to bolt on to a tpi engine or do you have to modify this more or buy more parts???
thanks
thanks
Thread Starter
Joined: May 2001
Posts: 386
Likes: 6
From: Silver Creek, GA
Car: 1989 Bright Red GTA
Engine: Grand Sport LT4
Transmission: T56
Axle/Gears: 10 bolt 3.73
Re: LT1 TPI HYBRID conversion parts
The intake is not ready to bolt ona TPI engine. You would need to drill new mounting holes to the heads and drill and tap coolant holes on the rear.
It is ready to bolt on to a LT1. This way, you could use a TPI harness, distributor and computer on the LT1.
----------
Come on guys, I need to buy a LS1!
It is ready to bolt on to a LT1. This way, you could use a TPI harness, distributor and computer on the LT1.
----------
Come on guys, I need to buy a LS1!
Last edited by Kwik89GTA; May 4, 2007 at 04:19 PM. Reason: Automerged Doublepost
Trending Topics
Thread Starter
Joined: May 2001
Posts: 386
Likes: 6
From: Silver Creek, GA
Car: 1989 Bright Red GTA
Engine: Grand Sport LT4
Transmission: T56
Axle/Gears: 10 bolt 3.73
Re: LT1 TPI HYBRID conversion parts
Everything sold! Thanks again guys!
Kevin
Kevin
Thread
Thread Starter
Forum
Replies
Last Post
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 12, 2015 03:41 PM
1992 Trans Am
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 8, 2015 08:16 PM
